Subtle Fleck (Blackout), Sage - Twist&Fit Roller Blind

• Our roller blinds all come with a durable sidewinder control featuring a white plastic chain mechanism, with a choice to upgrade to rust-resistant chrome.

• Durable and functional, roller blinds are great for bathroom, kitchens, and bedrooms.

• Roller blinds provide a great shade solution for your windows. For the best fit, fit as close to the window glass as possible to reduce light bleed.

• Smooth operation from its tried and tested sidewinder system.

On Standard Roller Finishes, Fixtures & Fittings

• The bottom of the blind has a single-wrapped bottom bar. This means the fabric will wrap around the front (or face) of the blind, providing a more cohesive finish. The bar is made from durable PVC or aluminium materials, depending on the chosen print base.

• Please note due to the fact the blinds are made to measure, we ensure the headrail will measure the finished blind size, not the fabric width. This means the fabric will be between 3.5cm-4cm narrower than the overall width of the headrail.

• All blinds are mounted on a strong aluminium tube – 32mm in diameter. We introduce a 40mm tube for larger blinds where necessary.

• All brackets are painted white over metal – 45mm width x 65mm length.

• Please note, blinds with a width greater than 180cm and a drop greater than 164cm MAY have a horizontal seam due to fabric width / design.

• Please note that the cloth width is 3.5 - 4cm narrower than the overall tube (pin to pin) size, this is to allow for the control components & brackets.

• All items are cut to size and will be accurate with working tolerances and variances of +/-5mm.

Twist&Fit Roller Blinds

• These blinds are designed as a drill-free, screw-free solution for fitting roller blinds. Brackets are not required, and you can fit these blinds in a matter of seconds.

• Available under the "recess" fitting option only under the relevant products.

• Twist Fit Roller blinds are supplied as standard with a sidewinder control unit. The operation is through a 4.5mm chrome beaded chain used to raise and lower.

• These roller blinds are produced the same way as a standard roller, though unlike roller blinds the tolerance of -3mm is not made for the recess due to the adjustability of the fitting.

• The twist cog can be used to adjust the tension.

On Twist&Fit Roller Finishes, Fixtures & Fittings

• Twist&Fit Unit is made from POM & PEM materials. This provides a durable, moisture-resistant component.

• The Twist End at its largest point (the cog wheel) has a width of 5.1cm | The external pad is 4.1cm width & height. | The distance from the end of the piece to the roller tube is 3.5cm, and when compressed at is smallest is 1.9mm to the tube.

• Sidewinder End is provided with a chain cover. Please do not attempt to remove this cover.

• The sidewinder end at its largest point is 5.1cm width & 6.4cm height.

• Only available on a 32mm diameter tube.

• All items are cut to size and will be accurate with working tolerances and variances of +/- 5mm.

• The bottom finish of the blind will be a straight finish. This will be finished with either a ‘stitched bottom pocket’ or a heat welded seam, with a plastic bottom lathe, dependent on the suitability of the fabric choice.

• Cloth width is 4.5cm narrower than the overall bracket to bracket (exact) width to allow for the control components.